Underlayment system
The deck is covered with underlayment suited to the slope lapped to shed water to the eaves.
Tile Roofing
Tile Roof Installation Newton, NJ
A Newton tile roofer can help choose between clay and concrete, flat or curved profiles, and install the full system beneath the tile. Dial (973) 858-9950 to talk with a local roofer about a new tile roof.
The first decision on a tile roof has nothing to do with color. Because tile is so heavy, homes converting from shingles usually need the framing checked, and some need reinforcement first. Houses designed for tile already account for that load in their framing.
The tile choice comes next. Clay tile is fired, keeps its color for a very long time and is lighter than most concrete tile, while concrete tile comes in many profiles and slowly fades as its surface weathers. Shapes range from flat and low profile tile to high profile S tile and traditional barrel tile.
The tile may last generations, but the layers below it decide when the roof leaks. Codes typically allow tile on slopes down to 2.5 in 12, with two layers of underlayment required on slopes under 4 in 12. Picking a durable underlayment at the start pushes the first relay decades down the road.
Depending on what the roofer finds, tile roof installation in Newton, NJ can go hand in hand with tile roof replacement and roof installation.
Dealing with this in Newton, NJ right now? Call (973) 858-9950 to reach a nearby roofing contractor.
Call nowThe process
What happens during a tile roof installation
A tile roof goes on in layers, and the tile is the last of them.
Plan for the load
Before ordering tile, the load on the rafters or trusses is checked, reinforcement is planned if needed and the permit is filed. It is smart to keep a stack of spare tile from the same batch for future repairs.
Dry in the roof
Decking is checked and fastened, drip edge goes on, and the deck is covered with the chosen underlayment, with self-adhered membrane in valleys and at eaves where ice or wind-driven rain is a concern. The underlayment is the true waterproof layer, so this step deserves the most care.
Batten layout
Battens are fastened across the roof at spacing set by the tile, and on many roofs counter battens run beneath them so water can drain freely. The gap under the tile also helps heat escape before it reaches the deck.
Install flashing
Valley metal, wall and headwall flashing, chimney flashing and soft metal flashing for vent pipes go in before and during tiling. Flashing for tile is built for the depth of the tile, which is why shingle flashing details do not carry over.
Lay the tile
Starting at the eave with a bird stop or eave closure, the roofer lays each course up the roof, fastening tile with nails, screws, clips or tile adhesive as the wind rules require. Cut edges at valleys and hips are fitted and secured carefully.
Finish the ridge
Hips and ridges are capped, often with a mechanically fastened system that allows ridge ventilation. Before the crew packs up, cracked pieces are swapped out.
What is included
Parts of a tile roof installation
Tile attachment
Tile is fastened with nails, screws, clips or adhesive so tiles stay put in strong wind.
Structural review
An engineer or span check confirms the structure and reinforced where needed.
Valley metal
Valleys, walls, chimneys and pipes get flashing sized for tile which is where tile roofs usually leak.
Ridge finish
Bird stops close the eave and caps seal the ridge with ventilation where the design calls for it.
Related service
Barrel Tile Roof Installation Newton, NJ
A barrel tile roof uses two pieces per course, a pan tile that channels water and a curved cover tile that caps each seam. Their tapered shape and deep profile create the rolling texture that defines the style. Because of that depth, barrel tile needs careful work at the eaves, hips and ridges, where the open curves must be closed off.
For barrel tile installation on a Newton home, each cover tile is secured with nails, wire ties, clips or foam adhesive, depending on the slope and wind rules. A crew snaps lines so pans and covers stay straight from eave to ridge.
Related service
Spanish Tile Roof Installation Newton, NJ
Spanish tile, also called S tile, merges the curved pan and cover into one interlocking piece. Both clay and concrete versions are made, in solid colors or blends from deep red to earth tones. Its interlocking side laps shed water well, but the curved ends at eaves and ridges still need closing off.
Spanish tile roof installation in Newton follows the same system as any tile roof, from structure check to underlayment, flashing and tile. The curves make flashing tricky, so roofers use shaped metal or flexible flashing that conforms to the tile. With a color blend, tile is drawn from several pallets as it goes up so no area looks patchy.
Local help
Tile Roof Installation Near Me
Around Newton, tile is installed on new construction designed for its weight and on existing homes being upgraded. For older homes in Newton and nearby towns like Andover, Hopatcong, Allamuchy and Franklin, the framing check is the step that decides whether tile is practical, and storms that bring strong wind make fastening choices as important as the tile itself.
For tile roof installation in Newton, NJ or nearby towns like Andover, Hopatcong, Allamuchy and Franklin, call (973) 858-9950 to reach a roofer who covers your street.
What the local climate does to a roof
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, building ice dams that push water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. That is why roof repair in Newton is busiest after a hard winter and before the next one.
Why call
Why fix it now
Smaller repairs
Small roof problems caught early usually stay small repairs.
Roofers who know Newton
Local roofers see the same roofs and storm damage across Newton and nearby towns.
Know what happens next
Ask the roofer about the cause, the options and the estimate before work starts.
Tile Roof Installation questions
What underlayment goes under a tile roof?
The common choices are felt, synthetic underlayment and self-adhered membrane. The underlayment usually wears out long before the tile, so a durable one delays the first relay. On slopes below 4 in 12, code requires two layers.
How heavy is a tile roof?
Clay and concrete tile are among the heaviest roof coverings, several times the weight of shingles. A home framed for shingles needs a structural check before switching, and some need added framing. Lightweight concrete tile is an option for some homes that fall short of the load for standard tile.
How long does it take to put on a tile roof?
Tile goes on slower than shingles, so most homes take one to several weeks. Steep pitches, many hips and valleys and a structural upgrade all add time. The roof is dried in with underlayment early, so the house is protected while tiling continues.
What is better, clay or concrete tile?
Both make durable roofs with different tradeoffs. Clay keeps its color through the tile, is lighter than most concrete tile and can last for generations. Concrete tile comes in many profiles and finishes, but it is heavier, absorbs more water and its color fades over time.
Can tile be installed over an existing roof?
The old roofing is torn off before tile is installed. That lets the roofer check the sheathing, replace soft spots and lay a proper underlayment.
More questions? Call (973) 858-9950
Related services
Tile Roof Replacement
Full tile roof replacement when the underlayment, fasteners or tile have reached the end of their life, with salvage of good tile wherever it makes sense.
Learn moreRoof Installation
New roof installation done in the right order with the right details, with ventilation and flashing planned in from the start.
Learn moreTile Roof Inspection
Tile roof inspections that count broken and slipped tiles, check the layers beneath and estimate how much life is left, without breaking tile in the process.
Learn moreRoof Ventilation
Roof ventilation work that keeps the attic dry in winter and cooler in summer, so shingles and decking last as long as they should.
Learn more
Looking for something else?
See all roofing servicesNeed tile roof installation in Newton, NJ?
Call now for Newton tile roof installation and help in the towns around it.