New flashing
Every flashing is renewed sized for the tile profile.
Tile Roofing
Tile Roof Replacement Newton, NJ
A roofer in Newton can replace a worn tile roof by removing the tile, repairing the deck, installing new underlayment and flashing, then relaying the sound tile or putting on new tile. Call (973) 858-9950 to reach a local roofer for tile roof replacement.
A tile roof rarely needs replacing because of the tile alone. When the tile is sound, the replacement is really a rebuild of the roof under the same tile, often called a lift-and-relay or a tile reset. Tile that has weathered badly or broken in large numbers is replaced with new tile.
The steps are the same whether the tile is reused or new. Tile is removed and stacked, the worn layers below are torn off, damaged decking is replaced and the roof is rebuilt with new underlayment and flashing. Most areas require a permit, and some require an inspection of the dry-in before tiling.
No tile removal is perfectly clean. Old tile can crack when its fasteners are pulled, so matching spares are lined up before the job starts. Ask how many tiles the roofer expects to lose and where replacements will come from.
Tile Roof Replacement is often paired with tile roof installation and tile roof repair, depending on the cause.
Need tile roof replacement in Newton? Call (973) 858-9950 to talk to a local roofer.
Call nowThe process
How tile roof replacement works
The goal is a new roof under tile that lasts as long as the tile on top.
Plan the job
The roofer checks the tile for brittleness and erosion, lifts tiles to see the underlayment and looks at the deck from the attic, then recommends relaying the existing tile or installing new. A roof with large sags should be checked from below before anyone walks on it.
Remove the tile
Tile is pulled course by course, sorted and stacked on the roof or on pallets, with broken pieces set aside. Work usually goes one section at a time so the house is never left open to weather.
Tear off old layers
Everything under the tile, from underlayment to battens to valley metal, is removed. The bare deck is checked, and rotted boards or delaminated sheets are replaced.
Install new underlayment
New underlayment goes down, often a self-adhered membrane or a heavy synthetic rated for tile, with new drip edge, valley metal and wall flashing. New battens and new bird stops go on before the tile.
Relay the tile
Tile is laid back on with new fasteners or adhesive, and replacement tile is blended in so the roof looks uniform. When the old tile is not reusable, new tile is installed over the new underlayment instead.
Final details
Hip and ridge caps are reset, often on a dry ridge system with ventilation, and the site is cleared of broken tile and debris. The permit is closed with a final inspection where required.
What is included
Parts of a tile roof replacement
New tile
New tile is installed where the old tile cannot be reused and finished with new ridge caps.
Deck repair
The bare deck is repaired where needed so the new roof has a solid base.
Tile removal
All tile is removed and sound pieces are saved for relaying on the new roof.
New underlayment
Modern underlayment replaces the worn original doubled or self-adhered where needed.
Related service
Tile Roof Underlayment Replacement Newton, NJ
Underlayment replacement is the job most older tile roofs need, even when the tile looks nearly new. Many original underlayments were basic felt, which hardens and splits after years of heat beneath the tile. Today, self-adhered and synthetic underlayments made for tile can last much longer than the old felt.
In Newton, a roofer replacing tile underlayment typically works one slope at a time, stacking tile on the next section over. Flashing and battens are renewed along with the underlayment, because reusing tired metal defeats the purpose. The result is a roof that keeps its original look over a brand new waterproof layer.
Related service
Clay Tile Roof Replacement Newton, NJ
Clay tile can last for generations, so replacement on a clay roof often means keeping the tile. Good clay is hard and holds its shape, while tile that has spalled, delaminated or turned soft is better replaced. Where enough tile has failed, the roof may be redone in new clay with a matching profile.
Clay tile roof replacement on a Newton home is as much about appearance as protection, especially with older profiles. Roofers often move original tile to the most visible slopes and use matching new or salvaged tile on the rear.
Local help
Tile Roof Replacement Near Me
In Newton, older tile roofs often still have their original tile and their original, aging underlayment. In Newton and neighboring areas including Andover, Hopatcong, Allamuchy and Franklin, storm damage and age are the two main reasons tile roofs come due, so a look under a few tiles is the first step in planning any replacement.
For tile roof replacement in Newton, NJ or nearby towns like Andover, Hopatcong, Allamuchy and Franklin, call (973) 858-9950 to reach a roofer who covers your street.
What the local climate does to a roof
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, building ice dams that push water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. Most homeowners in Newton, NJ have the roof checked in the fall and again after the snow melts.
Why call
Why fix it now
Smaller repairs
Small roof problems caught early usually stay small repairs.
Familiar with local homes
Local roofers see the same roofs and storm damage across Newton and nearby towns.
Straight answers
Ask your questions before you agree to anything.
Tile Roof Replacement questions
How do I know if I need a new tile roof or a repair?
The signal is leaks in several places plus underlayment that is brittle wherever tiles are lifted. Isolated damage can still be repaired. A roofer can lift tiles in several spots to show the condition underneath.
What is a tile roof lift-and-relay?
A lift-and-relay means removing the tile, replacing the underlayment, battens and flashing beneath it, then putting the same tile back. It is the standard fix when the tile is sound but the underlayment has failed.
Can my old roof tiles be reused?
Sound tile can be reused, and on many clay roofs most of it goes back on. A portion cracks on the way off and is replaced with matching tile. Eroded concrete tile and spalled clay are the pieces that should not go back up.
How long does a tile roof replacement take?
Expect more time than a shingle replacement, since tile is removed, sorted and relaid by hand. Deck repairs, structural work and finding matching tile can extend it. The roof is dried in section by section, so the house stays protected.
Can a tile roof be replaced with shingles or metal?
Changing to another roofing material is an option many owners consider when tile has worn out. Some neighborhoods require tile, so check those rules before planning a switch.
More questions? Call (973) 858-9950
Often needed together
Tile Roof Installation
Tile roof installation that starts with a structural check and ends with a sealed ridge, whether the home is new or switching from shingles.
Learn moreTile Roof Repair
Tile roof repairs from a single cracked tile to relaying a leaking section, without tearing off a roof that still has decades left.
Learn moreRoof Replacement
A complete new roof from the deck up when repairs no longer make sense, with the old layers removed and the deck checked.
Learn moreTile Roof Inspection
Tile roof inspections that count broken and slipped tiles, check the layers beneath and estimate how much life is left, without breaking tile in the process.
Learn more
Looking for something else?
See all roofing servicesNeed tile roof replacement in Newton, NJ?
Call (973) 858-9950 for a local roofer in Newton and nearby towns.